The SuperForm ICF Block

INTERLOCKING KNOBSOur unique square knob design offers 35% more surface friction fit than other systems on the market. The horizontal connection is so tight there is absolutely no vertical joint spreading.
TIEThe SuperForm tie stands tall with outstanding performance when compared to other systems. Our thick red tie flange (7.25mm – 5/16th) every 6”, are made of virgin polypropylene resulting in a higher more consistent tensile strength. You can have confidence that whatever you fasten to them will be secure. Our flow through design allows concrete to easily flow and bond to all EPS surfaces.
STANDARD SIZINGOur standard sizing of 4’ long x 1’ high makes building and estimating extremely simple. Our light weight block is very easy to handle by yourself, making it easier to work in trenches or up on the scaffolding. The 12” block takes out all vertical bulging in the wall giving you a flatter wall and gives you mores rebar options at 12” centers if needed.

PEACE OF MIND DURING INSTALLAll these features provide the installer peace of mind during the install and concrete pour. Due to the unmatched strength of SuperForm, there is no need for extra accessories. While other systems require zip ties, wire ties, glue/spray foam, form lock, kickers, or even applying plywood to every corner, SuperForm simplifies your installation without these extras. Because of our knob system, virgin tie material, and tie spacing, we create a simpler installation for builders; saving you significant time, effort, and money.

GROOVED INSIDE PANELOur grooved inside panel is designed for better concrete adherence. Our panels lock the concrete and EPS together making a connection that will not separate. The built-in anti-lift technology, locking all blocks down by concrete pressure on it. This eliminates the need to tie or lock down each row, making your installation faster.
DESIGN FLEXIBILITYSuperForm ICFs are designed with maximum design freedom with a 1″ repeating cut lines. This allows you to match any plan on the jobsite and helps reduce waste.
6” TIE SPACINGOur 6” tie spacing provides up to 33% more tie per block resulting in one of the strongest blocks on the market. With only 4” of foam between ties and 2” of foam on the end of the block, this eliminates vertical or horizontal bulging along block planes and provides a flatter, straighter, and stronger wall. The 6” inch tie spacing also allows for more attachment points in your wall, giving you more options.

The SuperForm Tie

VIRGIN TIE MATERIALOur ties consist of virgin material, which gives a more consistent and higher tie strength. This makes your wall stronger and safer; giving you peace of mind knowing it will handle the pressure of concrete. Our tensile tests exceed strengths of over 850 lbs.
THICKEST TIE FLANGEWith the thickest flange on the market, our tie performs when fastening anything to it. You don’t have to worry about stripping screws, making it the go to product for all builders. Our fastener withdrawal tests show up to double the strength of our competitors ties.
REBAR SLOTSOur rebar slots eliminate rebar tying, which leads to faster installation and less headaches.

12” TALL BLOCKDue to the size of our block, our tie size is only 1’ high, making it stronger due to more tie hold and less square footage than our competition (16-18” tall). This takes out all vertical and horizontal bulging along block joints, which gives you a flatter wall. This also gives you the option of a 12” rebar grid, making the wall stronger and giving engineers more options.
CONCRETE FLOW THROUGHOur tie design allows for maximum concrete flow through.
NO SETTLINGOur ties run the full height of the block resulting in no settling during the concrete pour.

Meet the Super Form ICF Block Series

Standard

Allows you to build straight walls with added durability and strength.

90 Degree

Creates strong 90-degree corners with minimal time required and greater ease, accompanied by an extremely strong corner tie with multiple fastening areas for finishing.

45 Degree

Creates strong 45-degree corners with minimal time required and greater ease, with multiple fastening areas for finishing.

Brick Ledge

Supports the installation of brick veneer on above-grade walls.